• Compact 2-rack high unit
• Eight or ten channels for monitoring processor or amplifier inputs
• All inputs and outputs are balanced
• Trimpots for adjustment of processor and amplifier levels
• Trimpot for bargraph display may be calibrated to the reference level for your theatre
• Twenty-five (25) pin D-sub connectors
• Removable Phoenix style terminal blocks
• HD15 connectors for VGA cables connections

CM Series One Sheet (PDF Format, 252 Kb)
English

XTA-680EA   Bi-Amp Analog Module

• 24dB per octave crossover filters operate at 297Hz, 330 Hz, 500Hz or 800Hz
• Time delay settings of 0.7ms, 1.4ms or 1.8ms
• Both horn EQ and screen EQ may be turned on or off
• Bypass circuit sums the three channels (L, C, R) and feeds emergency bi-amp signals out of the center channel

XTA One Sheet (PDF Format, 616 Kb)
English

XTD-680D   BI-Amp or Tri-Amp Digital Module

• Multiple presets for crossover frequencies and time delays. The units can be modified to provide different crossover frequencies and time delays and are equipped with back-up circuitry.

PXC-1
Front	Back
PXC-2
Front	Back

• PXC-1
  A horizontal breakout board for Left and Center channel VGA (HD-15) connectors.
• PXC-2
  A vertical breakout board for Left and Right channel VGA (HD-15) connectors

PXC-1 and PXC-2's are designed for use when the internal crossover for the CM-series is not being utilized. These breakout boards make the wiring of the CM-series quick and simple.

Manuals are available in PDF format, if you do not have Adobe Acrobat Reader you can download it from: http://www.adobe.com/products/acrobat/readstep.html

CM-680 Manual (683 Kb)
CM-Series (8 Channel) (1 Mb)
CM-Series (10 Channel) (2.8 Mb)

WIRING DIAGRAMS
JSD-80 Connection to the CM-35 monitor (312 Kb)
JSD-80 Connection to the CM-60 monitor (332 Kb)